Role of the microbiota-gut-heart axis between bile acids and cardiovascular disease.

Bile acid (BA) receptors (e.g., farnesoid X-activated receptor, muscarinic receptor) are expressed in cardiomyocytes, endothelial cells, and vascular smooth muscle cells, indicating the relevance of BAs to cardiovascular disease (CVD). Hydrophobic BAs are cardiotoxic, while hydrophilic BAs are cardioprotective. For example, fetal cardiac insufficiency in maternal intrahepatic cholestasis during pregnancy, and the degree of fetal cardiac abnormality, is closely related to the level of hydrophobic BAs in maternal blood and infant blood. However, ursodeoxycholic acid (the most hydrophilic BA) can reverse/prevent these detrimental effects of increased levels of hydrophobic BAs on the heart. The gut microbiota (GM) and GM metabolites (especially secondary BAs) have crucial roles in hypertension, atherosclerosis, unstable angina, and heart failure. Herein, we describe the relationship between CVD and the GM at the BA level. We combine the concept of the "microbiota-gut-heart axis" (MGHA) and postulate the role and mechanism of BAs in CVD development. In addition, the strategies for treating CVD with BAs under the MGHA are proposed.

Dual-energy computed tomography and micro-computed tomography for assessing bone regeneration in a rabbit tibia model.

To gain a more meaningful understanding of bone regeneration, it is essential to select an appropriate assessment method. Micro-computed tomography (Micro-CT) is widely used for bone regeneration because it provides a substantially higher spatial resolution. Dual-energy computed tomography (DECT) ensure shorter scan time and lower radiation doses during quantitative evaluation. Therefore, in this study, DECT and Micro-CT were used to evaluate bone regeneration. We created 18 defects in the tibial plateau of the rabbits and filled them with porous polyetheretherketone implants to promote bone regeneration. At 4, 8, and 12 weeks, Micro-CT and DECT were used to assess the bone repair in the defect region. In comparison to Micro-CT (152 ± 54 mg/cm3), the calcium density values and hydroxyapatite density values obtained by DECT [DECT(Ca) and DECT(HAP)] consistently achieved lower values (59 ± 25 mg/cm3, 126 ± 53 mg/cm3). In addition, there was a good association between DECT and Micro-CT (R = 0.98; R2 = 0.96; DECT(Ca): y = 0.45x-8.31; DECT(HAP): y = 0.95x-17.60). This study highlights the need to use two different imaging methods, each with its advantages and disadvantages, to better understand the bone regeneration process.

Differences in Vertebral Morphology and bone Mineral Density between Grade 1 Vertebral Fracture and Non-Fractured Participants in the Chinese Population.

PURPOSE: To investigate the difference in vertebral morphology and bone mineral density (BMD) between grade 1 VFs and non-fractured participants in the Chinese population to shed light on the clinical significance of grade 1 VFs from various perspectives. METHODS: This retrospective cohort study included patients who received a chest low-dose computed tomography (LDCT) scan for health examination and visited the First Affiliated Hospital of Zhengzhou University, Henan, China, from October 2019 to August 2022. Data were analyzed from March 2023 to July 2023. The main outcome of this study was the difference in morphological parameters and BMD between grade 1 VFs and non-fractured participants. The prevalence of grade 1 VFs in China populations was calculated. The difference in BMD of three fracture types in the Grade 1 group was also evaluated. RESULTS: A total of 3652 participants (1799 males, 54.85 ± 9.02 years, range, 40-92 years; 1853 females, 56.00 ± 9.08 years, range, 40-93 years) were included. The prevalence of grade 2 and 3 increase with age. The prevalence of grade 1 VFs gradually increases ≤ 50y to 60-69y group, but there is a decrease in the ≥ 70 years male group (6.6%) and a rise in the female group (25.5%). There was no significant statistical difference observed in vertebral shape indices (VSI) and BMD between the Grade 1 group and the no-fractured group aged < 50 years old except the wedge index in male. The biconcavity index did not differ between the non-fractured group and the Grade 1 group in men aged 50-59 years, whereas a significant statistical difference was observed in women. Additionally, the results of BMD were consistent with these findings. For the 40-59 years age group, there were significant differences between the compression deformity group and the other groups. CONCLUSIONS: The grade 1 group had higher VSI and lower BMD than the non-fractured group, suggesting an association between the Grade 1 group and osteoporosis in individuals aged over 50 for women and over 60 for men. Different fracture types have significant variations in BMD among middle-aged people. The prevalence of grade 1 VFs exhibits an age-related increase in both genders, with opposite trends observed between older males and females. We suggested VSI can aid physicians in the diagnosis of grade 1 VFs.

Mechanism of Salt Precipitation Blockage in Low-Producing Gas Wells and the Method of Acidification Blockage Removal.

In the Changqing area, over 23.6% of gas wells produce less than 0.1 × 104 m3/d of gas daily, posing a challenge to gas field sustainability. Laboratory analysis of scale samples from three wells and formation water analysis via inductively coupled plasma revealed soluble salt as the primary well blockage, with sodium chloride and calcium chloride comprising 48.0-81.2% of total content. The G3# well blockage contains a small amount of quartz from acid-insoluble components of carbonate acidification. Formation water from all wells exhibited high salinity (up to 153 g/L) with a calcium chloride water type. Scanning electron microscopy and EDS confirmed halite and quartz features in blockage samples. Theoretical calculations show salt crystallization when tubing pressure falls below 10 MPa and daily water production is <1.0 tons/day. Lower production leads to lower tubing pressure and higher salt precipitation at the bottom of the well. For G1# and G2# blockages, HCl dissolves >90%, and water >85%, making them suitable removal agents. For 3# blockage, mud acid with >80% dissolution is recommended. Chemical methods effectively clean the wellbore and formation. Optimized blockage removal measures increase tubing pressure and daily production by 2.18 and 4.05 times, respectively. This study offers insights into addressing well blockage challenges in low-producing gas wells.

Tertiary lymphoid structures predict survival and response to neoadjuvant therapy in locally advanced rectal cancer.

Tertiary lymphoid structure (TLS) contributes to the anti-tumor immune response, and predicts the prognosis of colorectal cancer patients. However, the potential impact of TLS in shaping the immune status of rectal adenocarcinoma, and the intrinsic relationship between TLS and neoadjuvant therapies (neoTx) remain unclear. We performed hematoxylin-eosin staining, immunohistochemical and biomolecular analyses to investigate TLS and tumor-infiltrating lymphocytes (TILs) in 221 neoTx-treated and 242 treatment-naïve locally advanced rectal cancer (LARC) patients. High TLS density was significantly associated with the absence of vascular invasion, a lower neutrophil-to-lymphocyte ratio, increased TLS maturity, a longer recurrence-free survival (RFS) (hazard ratio [HR] 0.2985 95% confidence interval [CI] 0.1894-0.4706, p < 0.0001) and enhanced infiltration of adaptive immune cells. Biomolecular analysis showed that high TLS-score was strongly associated with more infiltration of immune cells and increased activation of immune-related pathways. TLS+ tumors in pre-treatment specimens were associated with a higher proportion of good respond (62.5% vs. 29.8%, p < 0.0002) and pathological complete remission (pCR) (40.0% vs. 11.1%, p < 0.0001), and significantly increased RFS (HR 0.3574 95%CI 0.1489-0.8578 p = 0.0213) compared with TLS- tumors in the neoTx cohort, which was confirmed in GSE119409 and GSE150082. Further studies showed that neoTx significantly reduced TLS density and maturity, and abolished the prognostic value of TLS. Our study illustrates that TLS may have a key role in mediating the T-cell-inflamed tumor microenvironment, which also provides a new direction for neoTx, especially neoadjuvant immunotherapy, in LRAC patients.

Moisturizing and aroma-enhancing effects of low molecular weight fenugreek polysaccharides in cigarettes.

Polysaccharides possess excellent moisturizing effects due to their abundance of hydrophilic groups and film-forming properties. Additionally, they can produce a refreshing aroma during the pyrolysis process. However, there is scarce research on their application in the tobacco field. Herein, we investigated the effects of low molecular weight fenugreek polysaccharide (FP) obtained through ethanol fractionation and DEAE-52 cellulose column chromatography on moisture retention and aroma enhancement in tobacco. The moisture retention test revealed that the addition of FP increased the moisture retention index (MRI) of tobacco by 11.72 %-16.69 %, indicating that the hydrophilic nature of polysaccharides facilitated the migration of free water in tobacco to bound water, resulting in reduced water activity. Moreover, the contact angle between polysaccharide and tobacco was <90°, enabling better infiltration into tobacco and slowing down tobacco shrinkage caused by water loss. Among all the components, EFP-20 and EFP-40 demonstrated superior performance. Furthermore, FP exhibited excellent thermal stability below 200 °C and can decomposed to produce aromatic substances at high temperatures. It also demonstrated the ability to adsorb ethyl heptanoate and thermally decompose to produce a substantial amount of heptanoic acid. Consequently, the incorporation of FP in tobacco demonstrated favorable effects on both moisturization and aroma enhancement.

Synthesis, Thermal Stability and Antifungal Evaluation of Two New Pyrrole Esters.

To develop new chemicals that are stable at high temperatures with biological activity, a pyrrole intermediate was firstly synthesized using glucosamine hydrochloride as raw materials through cyclization and oxidation. Further, two novel pyrrole ester derivatives were prepared via Steglich esterification from pyrrole intermediate with vanillin and ethyl maltol, respectively. Nuclear magnetic resonance (1 H-NMR, 13 C NMR), infrared spectroscopy (IR) and high resolution mass spectrometry (HRMS) were used to confirm the target compounds. Thermal behavior of the compounds was investigated by thermogravimetry (TG), differential scanning calorimeter (DSC) and the pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) methods. The plausible pyrolytic mechanism was proposed. Additionally, their biological activities against the pathogens Fusarium graminearum, Fusarium oxysporum, Fusarium moniliforme, Phytophthora nicotianae, and Rhizoctonia solani were assessed. These target compounds showed outstanding antifungal activities and the highest inhibitor rates of 62.50 % and 68.75 % against R. solani with EC50 values of 0.0296 and 0.0200 mg mL-1 , respectively. SDHI protein sequence was molecularly docked to identify the binding mechanisms in the active pocket and examine the interactions between both the molecules and the SDHI protein.

Rational design of a rapidly responsive and highly selective fluorescent probe for SO2 derivatives detection and imaging.

Sulfur dioxide (SO2) is emerging as a double-edged molecule, while plays vital roles in food and biological system. However, the fast, highly sensitive, and versatile fluorescent probe still remains a tough challenge among current reports. Herein, we developed a novel aggregation-induced emission (AIE) fluorescent probe TPE-PN for specifically sensing SO2 derivatives with high sensitivity (150 nmol/L) and rapid response time (10 s) based on intramolecular charge transfer (ICT) mechanism. And the fluorescence at 575 nm decreased tremendously with 31-fold after the probe was treated with HSO3-. Employing the probe, the accurate analysis of HSO3- was successfully realized in food samples, cells, plant tissues, and zebrafishes. Furthermore, we successfully demonstrate the eruption of SO2 derivatives within plant during drought and salt stress processes. Therefore, probe TPE-PN illustrates significant potential for applications in food analysis and monitoring of SO2 derivatives levels in biological systems under stress conditions.

ABHD12 contributes to tumorigenesis and sorafenib resistance by preventing ferroptosis in hepatocellular carcinoma.

Sorafenib induces ferroptosis, making it a useful treatment against advanced liver hepatocellular carcinoma (LIHC). However, sorafenib resistance is extremely common among LIHC patients. Here, we used a comprehensive approach to investigate the effects of ABHD12, which regulates tumorigenesis and sorafenib resistance in LIHC. We validated ABHD12 expression was upregulated in LIHC tissue, which correlated with worse overall survival and related to tumor size or stage. ABHD12 facilitated a pro-tumorigenic phenotype involving increased cell proliferation, migration, and clonogenicity as well as sorafenib resistance. Knockout of ABHD12 sensitized liver cancer cells to sorafenib-induced ferroptosis. Co-delivery of sorafenib and ABHD12 inhibitor into a nude mouse model enhanced therapeutic efficacy for LIHC. Our study demonstrates that ABHD12 contributes to tumor growth and sorafenib resistance in liver cancer, which indicate the promising potential of ABHD12 in diagnosis and prognosis as well as highlight the potential therapeutic applications for co-delivery of sorafenib and ABHD12 inhibitor.

Design and Fabrication of Biomass Derived Black Carbon Modified g-C3 N4 /FeIn2 S4 Heterojunction as Highly Efficient Photocatalyst for Wastewater Treatment.

The environmental deterioration caused by dye wastewater discharge has received considerable attention in recent decades. One of the most promising approaches to addressing the aforementioned environmental issue is the development of photocatalysts with high solar energy consumption efficiency for the treatment of dye-contaminated water. In this study, a novel low-cost π-π biomass-derived black carbon modified g-C3 N4 coupled FeIn2 S4 composite (i.e., FeInS/BC-CN) photocatalyst is successfully designed and fabricated that reveals significantly improved photocatalytic performance for the degradation of Eosin Yellow (EY) dye in aqueous solution. Under dark and subsequent visible light irradiation, the amount optimized composite reveals 99% removal performance for EY dye, almost three-fold compared to that of the pristine FeInS and BC-CN counterparts. Further, it is confirmed by means of the electron spin resonance spectrometry, quenching experiments, and density functional theory (DFT) calculations, that the hydroxyl radicals (• OH) and superoxide radicals (• O2 - ) are the dominant oxidation species involved in the degradation process of EY dye. In addition, a systematic photocatalytic degradation route is proposed based on the resultant degradation intermediates detectedduring liquid chromatography tandem mass spectrometry (LC-MS/MS) analysis. This work provides an innovative idea for the development of advanced photocatalysts to mitigate water pollution.

Multimode microdimer robot for crossing tissue morphological barrier.

Swimming microrobot energized by magnetic fields exhibits remotely propulsion and modulation in complex biological experiment with high precision. However, achieving high environment adaptability and multiple tasking capability in one configuration is still challenging. Here, we present a strategy that use oriented magnetized Janus spheres to assemble the microdimer robots with two magnetic distribution configurations of head-to-side configuration (HTS-config) and head-to-head configuration (HTH-config), achieving performance of multiple tasks through multimode transformation and locomotion. Modulating the magnetic frequency enables multimode motion transformation between tumbling, rolling, and swing motion with different velocities. The dual-asynchronization mechanisms of HTS-config and HTH-config robot dependent on magnetic dipole-dipole angle are investigated by molecular dynamic simulation. In addition, the microdimer robot can transport cell crossing morphological rugae or complete drug delivery on tissues by switching motion modes. This microdimer robot can provide versatile motion modes to address environmental variations or multitasking requirements.

Dynamic Microenvironment-Adaptable Hydrogel with Photothermal Performance and ROS Scavenging for Management of Diabetic Ulcer.

Persistent bacterial infections and excessive oxidative stress prevent the healing of diabetic ulcers, leading to an increased disability rate. Current treatments fail to kill bacteria while simultaneously relieving oxidative stress. Herein, a dynamic microenvironment-adaptable hydrogel (BP@CAu) with photothermal performance and reactive oxygen species scavenging is presented for diabetic ulcer healing. This hydrogel prepared using a dynamic borate-ester could respond to acidity in the infection microenvironment for a controllable drug release. An excellent photothermal conversion effect was integrated in the hydrogel, which exhibited strong antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa. The hydrogel attenuated intracellular oxidative stress and inflammation and promoted cell migration. In a full-thickness skin defect model of diabetic rats, the BP@CAu hydrogel contributed to the fastest wound closure, with ideal reepithelialization, granulation tissue formation, and regeneration of blood vessels. Further mechanistic studies revealed that the hydrogel relieved oxidative stress and downregulated the expression of inflammatory cytokines, resulting in dramatic therapeutic effects on diabetic wounds. Therefore, this study provides a synergistic therapeutic strategy for efficient photothermal performance and reactive oxygen species scavenging in diabetic ulcers.

Estimation of right lobe graft weight for living donor liver transplantation using deep learning-based fully automatic computed tomographic volumetry.

This study aimed at developing a fully automatic technique for right lobe graft weight estimation using deep learning algorithms. The proposed method consists of segmentation of the full liver region from computed tomography (CT) images, classification of the entire liver region into the right and left lobes, and estimation of the right lobe graft weight from the CT-measured right lobe graft volume using a volume-to-weight conversion formula. The first two steps were performed with a transformer-based deep learning model. To train and evaluate the model, a total of 248 CT datasets (188 for training, 40 for validation, and 20 for testing and clinical evaluation) were used. The Dice similarity coefficient (DSC), mean surface distance (MSD), and the 95th percentile Hausdorff distance (HD95) were used for evaluating the segmentation accuracy of the full liver region and the right liver lobe. The correlation coefficient (CC), percentage error (PE), and percentage absolute error (PAE) were used for the clinical evaluation of the estimated right lobe graft weight. The proposed method achieved high accuracy in segmentation for DSC, MSD, and HD95 (95.9% ± 1.0%, 1.2 ± 0.4 mm, and 5.2 ± 1.9 mm for the entire liver region; 92.4% ± 2.7%, 2.0 ± 0.7 mm, and 8.8 ± 2.9 mm for the right lobe) and in clinical evaluation for CC, PE, and PAE (0.859, - 1.8% ± 9.6%, and 8.6% ± 4.7%). For the right lobe graft weight estimation, the present study underestimated the graft weight by - 1.8% on average. A mean difference of - 21.3 g (95% confidence interval: - 55.7 to 13.1, p = 0.211) between the estimated graft weight and the actual graft weight was achieved in this study. The proposed method is effective for clinical application.

Construction of micro-nano robots: living cells and functionalized biological cell membranes.

Micro-nano robots have emerged as a promising research field with vast potential applications in biomedicine. The motor is the key component of micro-nano robot research, and the design of the motor is crucial. Among the most commonly used motors are those derived from living cells such as bacteria with flagella, sperm, and algal cells. Additionally, scientists have developed numerous self-adaptive biomimetic motors with biological functions, primarily cell membrane functionalized micromotors. This novel type of motor exhibits remarkable performance in complex media. This paper provides a comprehensive review of the structure and performance of micro-nano robots that utilize living cells and functionalized biological cell membranes. We also discuss potential practical applications of these mirco-nano robots as well as potential challenges that may arise in future development.

Hydrogel-potassium humate composite alleviates cadmium toxicity of tobacco by regulating Cd bioavailability.

Cadmium (Cd) removal from soil to reduce Cd accumulation in plants is essential for agroecology, food safety, and human health. Cd enters plants from soil and affects plant growth and development. Hydrogels can easily combine with Cd, thereby altering its bioavailability in soil. However, few studies have evaluated the effects of hydrogel on the complex phytotoxicity caused by Cd uptake in plants and the microbial community structure. Herein, a new poly (acrylic acid)-grafted starch and potassium humate composite (S/K/AA) hydrogel was added to soil to evaluate its impact on tobacco growth and the soil microenvironment. The results indicate that the addition of S/K/AA hydrogel can significantly improve the biomass, chlorophyll (Chl) content, and photosynthetic capacity of tobacco plants during Cd stress conditions, and decrease Cd concentration, probably by affecting Cd absorption through the expression of Cd absorption transporters (e.g., NRAMP5, NRAMP3, and IRT1). Moreover, the application of S/K/AA hydrogel not only reduced the accumulation of reactive oxygen species (ROS), but also reduced the antioxidant activities of peroxidase (POD), superoxide dismutase (SOD), and catalase (CAT), suggesting that S/K/AA hydrogel alleviates Cd toxicity via a non-antioxidant pathway. Notably, we further analyzed the effectiveness of the hydrogel on microbial communities in Cd-contaminated soil and found that it increased the Cd-tolerant microbial community (Arthrobacter, Massilia, Streptomyces), enhancing the remediation ability of Cd-contaminated soil and helping tobacco plants to alleviate Cd toxicity. Overall, our study provides primary insights into how S/K/AA hydrogel affects Cd bioavailability and alleviates Cd toxicity in plants.

Picture fuzzy soft Bonferroni mean aggregation operators and their applications.

Due to more advanced features of the picture fuzzy soft set and valuable characteristics of aggregation operators, in this article, we present the notion of picture fuzzy soft Bonferroni mean aggregation operators and weighted picture fuzzy soft Bonferroni mean aggregation operators. Moreover, some basic properties of these introduced aggregation operators have been given. As cancer is one of the most rapidly increasing diseases globally. But due to different kinds of cancer diseases, it is very difficult to say which type of cancer disease is increasing rapidly. So to reduce this difficulty in the medical field, we have applied our work to medical diagnosis problems to ensure that fuzzy ideas can also help in the medical field. Also, an algorithm along with a descriptive example is established that conforms to the authenticity of initiated work. Furthermore, a comparative analysis of the introduced work has been given to show how this work is more efficient and dominant than other existing theories.

Pore size-mediated macrophage M1 to M2 transition affects osseointegration of 3D-printed PEEK scaffolds.

Increasing evidence indicates that macrophages play an important role in angiogenesis and bone regeneration. Because the phenotypic polarization of macrophage is extremely sensitive to the pore size of materials, poly(ether-ether-ketone) (PEEK) scaffolds with pore sizes of 0, 200, and 400 µm were prepared, and the influence of pore size-mediated macrophage polarization on subsequent angiogenesis and osteogenesis was examined. The interaction results of macrophages and scaffolds indicated that macrophages were responsive to the pore size of three-dimensional (3D)-printed PEEK scaffolds, and large pore size scaffolds showed greater potential in inducing M1 to M2 transition of macrophage and enhanced macrophage secretion of high concentrations of osteogenesis-related and angiogenesis-related cytokines. When human umbilical vein endothelial cells (HUVECs) and bone marrow mesenchymal stem cells (BMSCs) were cultured in the conditioned medium derived from co-culture of macrophages and scaffolds, HUVECs showed good angiogenic responses in terms of cell migration and angiogenic gene expression, while BMSCs showed good osteogenic differentiation effect in in vitro mineralization and osteogenesis-related gene expression. The results of bone defect repair showed that the bone volume/total volume ratio and trabecular thickness of the large pore size PEEK scaffold were significantly higher, and it had better biomechanical properties and achieved a better osseointegration effect. Our data demonstrate that large-pore PEEK scaffolds promote angiogenesis and osteogenic differentiation in vitro and osseointegration in vivo, most likely because scaffolds with larger pore size are able to mediate a higher degree of M1 to M2 transition in macrophages.

A novel study of spherical fuzzy soft Dombi aggregation operators and their applications to multicriteria decision making.

In many decision-making situations, we are not restricted to two kinds of aspects, such as membership degree or nonmembership degree, and sometimes we need to include the abstinence degree (AD). However, many fuzzy set theories fail to cover issues, such as an intuitionistic fuzzy soft set, Pythagorean fuzzy soft set and q-rung orthopair fuzzy soft set. All the above notions can only consider membership degree and a nonmembership degree in their structures. The spherical fuzzy soft set compensates for these drawbacks in its structure. Moreover, the Dombi t-norm and Dombi t-conorm are the fundamental apparatuses to generalize the basic operational laws of sum and product. Therefore, in this article, based on the dominant features of spherical fuzzy soft sets and valuable features of the Dombi t-norm and Dombi t-conorm, we initially developed the basic Dombi operational laws for spherical fuzzy soft numbers. Moreover, based on these newly developed operational laws, we introduced aggregation operators called spherical fuzzy soft Dombi average (weighted, ordered weighted, hybrid) aggregation operators. We discussed the basic properties of these aggregation operators. Additionally, we have developed a multiple criteria decision making (MCDM) approach using an explanatory example via our approach to show its effective utilization. Furthermore, a comparative study of our approach shows the superiority of our introduced notions.

Fluorescent probes for lighting up ferroptotic cell death: A review.

Ferroptosis is a newly discovered form of regulated cellular demise, characterized by the accumulation of intracellular oxidative stress that is dependent on iron. Ferroptosis plays a crucial role not only in the development and treatment of tumors but also in the pathogenesis of neurodegenerative diseases and illnesses related to ischemia-reperfusion injury. This mode of cell death possesses distinctive properties that differentiate it from other forms of cell death, including unique morphological changes at both the cellular and subcellular levels, as well as molecular features that can be detected using specific methods. The use of fluorescent probes has become an invaluable means of detecting ferroptosis, owing to their high sensitivity, real-time in situ monitoring capabilities, and minimal damage to biological samples. This review comprehensively elucidates the physiological mechanisms underlying ferroptosis, while also detailing the development of fluorescent probes capable of detecting ferroptosis-related active species across various cellular compartments, including organelles, the nucleus, and the cell membrane. Additionally, the review explores how the dynamic changes and location of active species from different cellular compartments can influence the ignition and execution of ferroptotic cell death. Finally, we discuss the future challenges and opportunities for imaging ferroptosis. We believe that this review will not only aid in the elucidation of ferroptosis's physiological mechanisms but also facilitate the identification of novel treatment targets and means of accurately diagnosing and treating ferroptosis-related diseases.

A cross-calibration study using a novel dual X-ray absorptiometry system for bone mineral density measurements with the European Spine Phantom.

Background: For bone health assessment, dual-energy X-ray absorptiometry (DEXA) is recommended to measure bone mineral content and areal bone mineral density (aBMD) in the lumbar spine. However, intermachine differences were not taken into account when developing these recommendations. According to the International Society of Clinical Densitometry (ISCD), phantom-based cross-calibration is adequate after replacing the DEXA system from a different manufacturer. For different DEXA equipment, individual calibration equations were found to be necessary to fit the observed values with the given densities. Methods: The BMD European Spine Phantom (ESP) measurements (L1, L2, and L3) were assessed on 3 machines. We used the Welch test in the one-way analysis of variance (ANOVA) with a post-hoc Tamhane T2 test, linear regressions, and Bland-Altman analysis to assess the consistency of measurements and establish cross-calibration equations. Results: The coefficients of variation (CV)% of the phantom BMD values measured using the 3 systems were less than 3.0%. The 3 DEXA systems were highly correlated with BMD in the lumbar spine, with correlation values ranging from 0.933 to 0.984 (P<0.0001). The cross-calibration regression models of the ESP measurements yielded the highest prediction accuracies with the lowest prediction errors (the standard error of the estimate ranged from 0.004 to 0.008 g/cm2; P<0.0001). After the regression equations were applied, the differences in BMD values among the 3 systems were negligible. In addition, the Bland-Altman plot showed that almost all data points were within the 95% limits of agreement. Conclusions: A strong agreement for BMD measurement was established between the 3 DEXA systems. Cross-calibration equations for the lumbar spine BMD values need to be applied to transform the Hologic Discovery A or GE Lunar iDXA measurements into SONIALVISION SMIT measurements to comply with the ISCD standards for patient continuity of care in assessment during clinical diagnosis.